The cleaning agent provided by Standard International Group (HK) Limited is a concentrated environmentally friendly product. Depending on the degree of dirtiness, it can be diluted to 10-20 times the working fluid for use. If the working fluid is not properly maintained, it is easy to cause problems such as effect attenuation, reduced cleaning efficiency, and increased defective rate. The key points of cleaning agent working fluid maintenance are as follows:
1. Regularly monitor the liquid level. The water evaporates or is taken away by the workpiece during the cleaning process, which will cause the liquid level to drop. Pay attention to replenishing water and cleaning agent in proportion.
2. Regularly test the alkalinity, refractive index or conductivity of the working fluid to monitor whether the effective components of the working fluid are abnormal.
3. Regularly check whether the temperature control and ultrasonic power of the equipment are abnormal.
4. Regularly replace the tank liquid according to the instruction manual.
5. Regularly check the circulation pump and filter device of the working tank to discharge the dirt and sediment separated by cleaning in time.
The above maintenance work is in place to reduce cleaning abnormalities and improve the stability of the work section.
