Introduction
The main components of polishing wax are abrasives and grease, among which abrasives play a grinding role, while grease plays an adhesion and lubrication role. During the polishing process, polishing wax will remain on the surface of the workpiece, forming a wax film, which will affect the surface roughness and finish of the workpiece. Therefore, it is necessary to use a suitable polishing wax cleaning agent with ultrasonic cleaning method to clean the polishing wax.
Ultrasonic cleaning
Due to the strong impact force and micro jet generated by ultrasonic waves, it has a strong cleaning ability, which can effectively cooperate with cleaning agents to clean the polishing wax remaining on the surface of the workpiece. Moreover, ultrasonic cleaning has the advantage of not damaging the surface of the workpiece, and can effectively protect the surface quality of the workpiece. In addition, the efficiency of ultrasonic cleaning is high, which can greatly improve production efficiency and reduce production costs.
Main performance of polishing wax cleaning agent
1. Complete dissolution, low foam, easy rinsing
2. Fast wax removal, strong permeability, and can clean the blind holes and dead corners of the workpiece in place.
3. It has a protective effect on the workpiece substrate and will not affect the material itself and the surface polishing effect.
4. Good wettability, certain degreasing effect, the workpiece is bright and has no spots after cleaning;
5. It does not contain sodium hydroxide and inorganic salts, has a soft alkalinity, does not damage the substrate, and does not change the color of the metal surface after treatment
6. The ratio concentration is appropriate, the service life is long, and it does not need to be replaced frequently. Just add new liquid on time.
