Preface
Polishing wax cleaner is a water-based cleaner designed for cleaning stainless steel and aluminum products, and is particularly suitable for use in ultrasonic cleaning equipment. Stainless steel and aluminum are widely used in aerospace, automobile manufacturing, home appliances and other fields due to their excellent lightweight characteristics and good corrosion resistance. However, during the processing and use of hardware, polishing wax, oil and other contaminants often remain on the surface, affecting the appearance and subsequent processing.
Ultrasonic cleaning
Ultrasonic cleaning is the principle of using high-frequency sound waves to generate tiny bubbles (called "cavitation") in the cleaning liquid. When sound waves pass through the liquid, bubbles are continuously generated, enlarged and broken, forming strong shock waves. This microscopic impact can penetrate into the tiny gaps and pores on the surface of the object, effectively removing surface attachments. For polishing wax on the surface of metal parts, ultrasonic cleaning can make full use of the chemical composition of the cleaning agent, making the cleaning process more thorough.
Detailed steps
When using polishing wax cleaner for ultrasonic cleaning, follow the following steps:
Prepare the cleaning solution: According to the instructions of the cleaning agent, dilute the cleaning agent and water in an appropriate proportion and stir evenly.
Put the metal parts in the cleaning tank: Make sure there are no large pieces of dirt on the surface of the workpiece to facilitate the penetration of the cleaning agent.
Set the ultrasonic cleaning parameters: According to the characteristics of the workpiece and the degree of contamination, select the appropriate ultrasonic frequency and cleaning time. Generally speaking, the frequency between 28-40 kHz is better, and the cleaning time can be adjusted according to the specific situation.
Cleaning process: Start the ultrasonic cleaning equipment, and the cleaning agent starts to work under the action of ultrasound. You can observe the changes in the cleaning liquid to ensure that the cleaning process is effective.
Rinse: After cleaning, take out the aluminum parts and rinse them with clean water to remove residual cleaning agents and dirt.
Drying treatment: Dry the workpiece with a hair dryer or dryer to remove water marks on the surface of the metal parts.
